Process Control Indicator

Product Description

Process Control Indicator 

Technical Specification

input type (Field selectable)

• Thermocouple; K. S. R, E. J. N
• Resistance thermometer. Pt100
• Linear voltage: 0 -5V, 0 - lV, 0 -500mv, 0 - 100mv, 0 - 60mV, 0 - 20mv. etc; 0-10V (with l3 rule Module installed in Mio Slot
• Linear current (should connect a external resistor or lnstall l4 module ln Mio slot); 0 -20imA. 4 -20mA
• Linear resistor: 0 -00 ohm,0 -400 ohm

Measurement range

• K(( 100 - +1300C), S(0 -1700C), R(0 -1600C), E(0-1000C). J(0-1200C), N(0 -1300C),
• Pt100(200-800C)
• Linear input :9990  +30000 unit defined by user
• measurement accuracy : 0.3%FS + 1 unit
• Temperature display resolution :0.1 C for K,E ,J,N pt100 and 1C for S,R
• Temperature Shift :0.015%FS/C (Typical value is 75ppm/C)
• Electromagnetic compatibility (EMC) : IEC61000-4.4 +/- 4KV/5KH, lEC61000-4-5 KV
• Retransmission : When X3 current module is installed ln OUT slot. process value (PV) can be retransmitted to standard current With maximum load resistor 500 ohm,
• Alarm function : High limit, low limit, and second high limit, second low limit,
• isolation withstanding voltage : between power, relay contact or signal terminals 2300VDC, between isolated electroweak signal terminals  600VDC
• Power supply: 100 -240VAC, 15%+ 10%/ 50-60Hz, 120 -240VDC,240VDC 24VDC/AC,-15%, +10%
• Power consumption: 5W
• Operating Ambient: temperature 10 + 60 C,humidity90%RH
• Front palm dimension : 96 x 96mm, 160mm x 80x160mm, 48 x 96mm. 72 x 72mm, 48x48mm
• Panel cut out dimension : 92 x 92mm, 152 x 76mm, 76 x 152, 45 x 92 , 92 x 45mm, 68 x 56mm, 45 x 45mm
• Depth behind mounting surface : 100mm

Co2 meter PI-4896